Green Screen Column Trellis System

Column trellis system basics

1. Load family into project
2. Family will load into Specialty Equipment Category
3. This family can be placed freely on the project
4. Once placed you can move element horizontally to a precise location if required
5. Adjustable Instance parameters
	a. Finish
	b. Vines (preset vines for rendering application)
8. Adjustable Type Parameters
	a. Panel Diameter (Standard 15 1/2", consult Green Screen for custom sizes)
	b. Panel Height (2" Increments up to 14')
	c. Embed Height (allows to embed pole into ground)

Using render materials for trellis panel and vines

1. Un-zip material file into C:\Program Files\Revit Architecture 2009\Data\Rendering\assetlibrary_base.fbm\Materials\Hardwood\Presets
	*material images are pre-mapped to this location
3. Load Family into Revit
4. Open Materials
5. Select Rendering
6. Select a Green Screen Trellis material or plant material
	- The jpg image under Image File should have a swatch in it.
If you see a swatch than process was successful.
If you do not see a swatch, follow the steps below
	a. Click browse button next to Image file location space
	b. Locate desired image file on you hard drive
	c. Select file and click open